GDS-806S Digital Oscilloscope

	GDS-806S / C	GDS-810S / C	GDS-820S / C	GDS-840S / C
DISPLAY SYSTEM
Display Device	806S : Mono LCD 806C : STN LCD (320 x240) 5.7" LCD	810S : Mono LCD 810C : STN LCD (320 x240) 5.7" LCD	820S : Mono LCD 820C : STN LCD (320 x240) 5.7" LCD	840S : Mono LCD 840C : STN LCD (320 x240) 5.7" LCD
Display Contrast	Adjustable
Waveform Display Graticule	8×10 divisions ( 8 x 12 div, when menu off )
Display Mode	Dot, Vector, Accumulate
VERTICAL SYSTEM
Bandwidth	60MHz (-3dB)	100MHz (-3dB)	150MHz (-3dB)	250MHz (-3dB)
Channels	2
Vertical Resolution	8-Bit
Vertical Sensitivity	2mV/div ~ 5V/div
Vertical Accuracy	±3%
Rise Time	＜5.8ns	＜3.5ns	＜2.3ns	＜1.4ns
Input Coupling	AC、DC、Ground
Input Impedance	1MΩ ±2%, ~ 18pF		1MΩ ±2%, ~ 22pF	1MΩ ±2%, ~ 18pF
Polarity	Positive & Negative
Maximum Voltage Between Signal & Common at Input BNC	300V ( DC+AC peak ), CATII
Waveform Signal Process	CH1+CH2、CH1-CH2、FFT
Offset Range	2mV/div ~ 50mV/div：±0.5V 100mV/div ~ 500mV/div：±5V 1V/div ~ 5V/div：±50V
BW Limit	20MHz ( -3dB )
HORIZONTAL SYSTEM
Time Base Range	1ns/div ~ 10s/div ; Roll : 250ms/div~10s/div
Time Base Mode	Main、Window、Window Zoom、Roll、X-Y
Time Base Accuracy	±0.01%
Delay Range	Pre-trigger : 20 div maximum; Post-trigger : 1000 div
SIGNAL ACQUISITION SYSTEM
Real-Time Sample Rate	100MS/s maximum on each channel
Equivalent-Time Sample Rate	25GS/s maximum on each channel
Record Length	125k/CH
Peak Detection	10ns (500ns/div~10s/div)
Acquisition Mode	Sample、Peak Detect、Average
Average	2, 4, 8, 16, 32, 64, 128, 256
TRIGGER
Trigger Source	CH1, CH2, Line, Ext
Mode	Auto Level、Auto、Normal、Single、TV、Time Delay、Event Delay、Edge、Pulse Width
Coupling	AC, DC, HF, LF, Noise Reject
Sensitivity	DC~25MHz : 0.5div or 5mV 25MHz~60MHz : Approx. 1.5div or 15mV	DC~25MHz : 0.5div or 5mV 25MHz~100MHz : 1.5div or 15mV	DC~30MHz : 0.5div or 5mV 30MHz~150MHz : 1.5div or 15mV	DC~30MHz : 0.5div or 5mV 30MHz~150MHz : 1.5div or 15mV 150MHz~250MHz : 2.0div or 20mV
X-Y MODE
X-Axis Input / Y-Axis Input	Channel 1 / Channel 2
Phase Shift	±3° at 100kHz
CURSOR & MEASUREMENT
Auto Voltage Measurement	Vpp，Vamp，Vavg，Vrms，Vhi，Vlo，Vmax，Vmin
Auto Time Measurement	Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Cursor Measurement	Voltage difference between cursors(ΔV) Time difference between cursors(ΔT) Frequency difference between cursors(1/ΔT)
FREQUENCY COUNTER
Readout Resolution	Max. 6 digits
Frequency Range	AC Coupled, 20Hz to rated bandwidth; resolution : 10Hz
Signal Source	All available trigger source except the Video Trigger mode
EXTERNAL TRIGGER
Range	±15V
Sensitivity	DC~25MHz:~50mV 25~60MHz :~100mV	DC~25MHz:~50mV 25~100MHz :~100mV	DC~30MHz:~50mV 30~150MHz :~100mV	DC~30MHz:~50mV 30~150MHz :~100mV 150MHz~250MHz : ~150mV
Input Impedance	1MΩ±2%, ~ 18pF		1MΩ±2%, ~ 22pF	1MΩ±2%, ~ 18pF
Maximum Input	300V ( DC+AC peak ) , CATII
CONTROL PANEL FUNCTION
AutoSet	"Autoset" can adjust Vertical ( Volt/div ), Horizontal ( Sec/div ) and Trigger level automatically
Save/Recall	Up to 15 sets of measurement conditions can be saved and recalled
Waveform Trace Save/Recall	2 sets of waveform can be saved and recalled
INTERFACE
Standard	RS-232C		USB, RS-232C, Printer Port, Go/NoGo Output
Option 01	GPIB (Factory Installed)
Option 11	USB, Printer Port, Go/NoGo Output (Factory Installed)		-
POWER SOURCE
	100V ~ 240V, AC 47Hz ~ 63Hz, Auto selection
DIMENSIONS & WEIGHT
	310(W) x 142(H) x 254(D)mm, Approx. 4.1kg

GDS-806S Digital Oscilloscope[단종]

 

 

* 60MHz Bandwidth With Mono LCD Display
* 125k Long Memory and 12 Division Horizontal Display
* 25GS/s Sampling Rate for Repetitive Waveforms
* Advanced Trigger:Pulse Width,TV Line,Event Delay And Time Delay
* Go-NoGo and Auto Setup Sequence
* FFT Function
* Built-In Help Manual, Multi-Language and PC Software
* Standard Interface: USB, RS-232C, Printer Port, Go/NoGo Output
* Option: GPIB Interface

 

 

GDS-806S Digital Oscilloscope 사용자 메뉴얼 82DS-82000MB[1].pdf